Tuesday, January 30, 2007

Inspire Yourself: 50 Remarkable Favicons

Let ’s take a look at 50 beautiful favicons you can inspire yourself from. You can click on favicons - they lead to a page, which uses the image as a page icon. More >>>

Monday, January 29, 2007

Advanced Vi Cheat Sheet

Advanced Vi Cheat Sheet




General Notes:

1. Before doing anything to a document, type the following command followed by a carriage return: :set showmode

2. VI is CaSe SEnsItiVe!!! So make sure Caps Lock is OFF.


Starting and Ending VI


Starting VI
vi filenameEdits filename
vi -r filenameEdits last save version of filename after a crash
vi + n filenameEdits filename and places curser at line n
vi + filenameEdits filename and places curser on last line
vi +/string filenameEdits filename and places curser on first occurance of string
vi filename file2 ...Edits filename, then edits file2 ... After the save, use :n


Ending VI
ZZ or :wq or :xSaves and exits VI
:wSaves current file but doesn't exit
:w!Saves current file overriding normal checks but doesn't exit
:w fileSaves current as file but doesn't exit
:w! fileSaves to file overriding normal checks but doesn't exit
:n,mw fileSaves lines n through m to file
:n,mw >>fileSaves lines n through m to the end of file
:qQuits VI and may prompt if you need to save
:q!Quits VI and without saving
:e!Edits file discarding any unsaved changes (starts over)
:we!Saves and continues to edit current file



Status


:.=Shows current line number
:=Shows number of lines in file
Control-GShows filename, current line number, total lines in file, and % of file location
lDisplays tab (^l) backslash (\) backspace (^H) newline ($) bell (^G) formfeed (^L^) of current line



Modes


Vi has two modes insertion mode and command mode. The editor begins in command mode, where the cursor movement and text deletion and pasting occur. Insertion mode begins upon entering an insertion or change command. [ESC] returns the editor to command mode (where you can quit, for example by typing :q!). Most commands execute as soon as you type them except for "colon" commands which execute when you press the ruturn key.



Inserting Text


iInsert before cursor
IInsert before line
aAppend after cursor
AAppend after line
oOpen a new line after current line
OOpen a new line before current line
rReplace one character
RReplace many characters
CTRL-v charWhile inserting, ignores special meaning of char (e.g., for inserting characters like ESC and CTRL) until ESC is used
:r fileReads file and inserts it after current line
:nr fileReads file and inserts it after line n
CTRL-i or TABWhile inserting, inserts one shift width

Things to do while in Insert Mode:
CTRL-h or BackspaceWhile inserting, deletes previous character
CTRL-wWhile inserting, deletes previous word
CTRL-xWhile inserting, deletes to start of inserted text
CTRL-vTake the next character literally. (i.e. To insert a Control-H, type Control-v Control-h)



Motion


hMove left
jMove down
kMove up
lMove right
Arrow KeysThese do work, but they may be too slow on big files. Also may have unpredictable results when arrow keys are not mapped correctly in client.
wMove to next word
WMove to next blank delimited word
bMove to the beginning of the word
BMove to the beginning of blank delimted word
^Moves to the first non-blank character in the current line
+ or Moves to the first character in the next line
-Moves to the first non-blank character in the previous line
eMove to the end of the word
EMove to the end of Blank delimited word
(Move a sentance back
)Move a sentance forward
{Move a paragraph back
}Move a paragraph forward
0 or |Move to the begining of the line
n|Moves to the column n in the current line
$Move to the end of the line
1GMove to the first line of the file
GMove to the last line of the file
nGMove to nth line of the file
:nMove to nth line of the file
fcMove forward to c
FcMove back to c
HMove to top of screen
nHMoves to nth line from the top of the screen
MMove to middle of screen
LMove to botton of screen
nLMoves to nth line from the bottom of the screen
Control-dMove forward � screen
Control-fMove forward one full screen
Control-uMove backward � screen
Control-bMove backward one full screen
CTRL-eMoves screen up one line
CTRL-yMoves screen down one line
CTRL-uMoves screen up � page
CTRL-dMoves screen down � page
CTRL-bMoves screen up one page
CTRL-fMoves screen down one page
CTRL-IRedraws screen
z z-carriage return makes the current line the top line on the page
nz Makes the line n the top line on the page
z.Makes the current line the middle line on the page
nz.Makes the line n the middle line on the page
z-Makes the current line the bottom line on the page
nz-Makes the line n the bottom line on the page
%Move to associated ( ), { }, [ ]



Deleting Text


Almost all deletion commands are performed by typing d followed by a motion. For example, dw deletes a word. A few other deletes are:
xDelete character to the right of cursor
nxDeletes n characters starting with current; omitting n deletes current character only
XDelete character to the left of cursor
nXDeletes previous n characters; omitting n deletes previous character only
DDelete to the end of the line
d$Deletes from the cursor to the end of the line
dd or :dDelete current line
ndwDeletes the next n words starting with current
ndbDeletes the previous n words starting with current
nddDeletes n lines beginning with the current line
:n,mdDeletes lines n through m
dMotion_cmdDeletes everything included in the Motion Command (e.g., dG would delete from current position to the end of the file, and d4 would delete to the end of the fourth sentence).
"npRetrieves the last nth delete (last 9 deletes are kept in a buffer)
"1pu.u.Scrolls through the delete buffer until the desired delete is retrieved (repeat u.)



Yanking Text


Like deletion, almost all yank commands are performed by typing y followed by a motion. For example, y$ yanks to the end of the line. Two other yank commands are:
yyYank the current line
:yYank the current line
nyy or nYPlaces n lines in the buffer-copies
yMotion_cmdCopies everything from the curser to the Motion Command (e.g., yG would copy from current position to the end of the file, and y4 would copy to the end of the fourth sentence)
"(a-z)nyy or "(a-z)nddCopies or cuts (deletes) n lines into a named buffer a through z; omitting n works on current line




Changing text


The change command is a deletion command that leaves the editor in insert mode. It is performed by typing c followed by a motion. For example cw changes a word. A few other change commands are:
CChange to the end of the line
cc or SChange the whole line until ESC is pressed
xpSwitches character at cursor with following character
stextSubstitutes text for the current character until ESC is used
cwtextChanges current word to text until ESC is used
CtextChanges rest of the current line to text until ESC is used
cMotion_cmdChanges to text from current position to Motion Command until ESC is used
<<>>Shifts the line left or right (respectively) by one shift width (a tab)
n<< color="blue">n>>Shifts n lines left or right (respectively) by one shift width (a tab)
Motion_cmdUse with Motion Command to shift multiple lines left or right



Putting text


pPut after the position or after the line
PPut before the poition or before the line
"(a-z)p or "(a-z)PPastes text from a named buffer a through z after or before the current line



Buffers


Named buffers may be specified before any deletion, change, yank or put command. The general prefix has the form "c where c is any lowercase character. for example, "adw deletes a word into buffer a. It may thereafter be put back into text with an appropriate "ap.



Markers


Named markers may be set on any line in a file. Any lower case letter may be a marker name. Markers may also be used as limits for ranges.
mcSet marker c on this line
`cGo to beginning of marker c line.
'cGo to first non-blank character of marker c line.



Search for strings


/stringSearch forward for string
?stringSearch back for string
nSearch for next instance of string
NSearch for previous instance of string
%Searches to beginning of balancing ( ) [ ] or { }
fcSearches forward in current line to char
FcSearches backward in current line to char
tcSearches forward in current line to character before char
TcharSearches backward in current line to character before char
?strFinds in reverse for str
:set icIgnores case when searching
:set noicPays attention to case when searching
:n,ms/str1/str2/optSearches from n to m for str1; replaces str1 to str2; using opt-opt can be g for global change, c to confirm change (y to acknowledge, to suppress), and p to print changed lines
&Repeats last :s command
:g/str/cmdRuns cmd on all lines that contain str
:g/str1/s/str2/str3/Finds the line containing str1, replaces str2 with str3
:v/str/cmdExecutes cmd on all lines that do not match str
,Repeats, in reverse direction, last / or ? search command



Replace


The search and replace function is accomplished with the :s command. It is commonly used in combination with ranges or the :g command (below).
:s/pattern/string/flagsReplace pattern with string according to flags.
gFlag - Replace all occurences of pattern
cFlag - Confirm replaces.
&Repeat last :s command



Regular Expressions


. (dot)Any single character except newline
*zero or more occurances of any character
[...]Any single character specified in the set
[^...]Any single character not specified in the set
\<Matches beginning of word
\>Matches end of word
^Anchor - beginning of the line
$Anchor - end of line
\<Anchor - begining of word
\>Anchor - end of word
\(...\)Grouping - usually used to group conditions
\nContents of nth grouping
\Escapes the meaning of the next character (e.g., \$ allows you to search for $)
\\Escapes the \ character

[...] - Set Examples
[A-Z]The SET from Capital A to Capital Z
[a-z]The SET from lowercase a to lowercase z
[0-9]The SET from 0 to 9 (All numerals)
[./=+]The SET containing . (dot), / (slash), =, and +
[-A-F]The SET from Capital A to Capital F and the dash (dashes must be specified first)
[0-9 A-Z]The SET containing all capital letters and digits and a space
[A-Z][a-zA-Z]In the first position, the SET from Capital A to Capital Z
In the second character position, the SET containing all letters
[a-z]{m}Look for m occurances of the SET from lowercase a to lowercase z
[a-z]{m,n}Look for at least m occurances, but no more than n occurances of the SET from lowercase a to lowercase z

Regular Expression Examples
/Hello/Matches if the line contains the value Hello
/^TEST$/Matches if the line contains TEST by itself
/^[a-zA-Z]/Matches if the line starts with any letter
/^[a-z].*/Matches if the first character of the line is a-z and there is at least one more of any character following it
/2134$/Matches if line ends with 2134
/\(21|35\)/Matches is the line contains 21 or 35
Note the use of ( ) with the pipe symbol to specify the 'or' condition
/[0-9]*/Matches if there are zero or more numbers in the line
/^[^#]/Matches if the first character is not a # in the line
Notes:
1. Regular expressions are case sensitive
2. Regular expressions are to be used where pattern is specified



Counts


Nearly every command may be preceded by a number that specifies how many times it is to be performed. For example, 5dw will delete 5 words and 3fe will move the cursor forward to the 3rd occurence of the letter e. Even insertions may be repeated conveniently with this method, say to insert the same line 100 times.



Ranges


Ranges may precede most "colon" commands and cause them to be executed on a line or lines. For example :3,7d would delete lines 3-7. Ranges are commonly combined with the :s command to perform a replacement on several lines, as with :.,$s/pattern/string/g to make a replacement from the current line to the end of the file.
:n,mRange - Lines n-m
:.Range - Current line
:$Range - Last line
:'cRange - Marker c
:%Range - All lines in file
:g/pattern/Range - All lines that contain pattern



Shell Functions


:! cmdExecutes shell command cmd; you can add these special characters to indicate:% name of current file# name of last file edited
!! cmdExecutes shell command cmd, places output in file starting at current line
:!!Executes last shell command
:r! cmdReads and inserts output from cmd
:f fileRenames current file to file
:w !cmdSends currently edited file to cmd as standard input and execute cmd
:cd dirChanges current working directory to dir
:shStarts a sub-shell (CTRL-d returns to editor)
:so fileReads and executes commands in file (file is a shell script)
!Motion_cmdSends text from current position to Motion Command to shell command cmd
!}sortSorts from current position to end of paragraph and replaces text with sorted text



Files


:w fileWrite to file
:r fileRead file in after line
:nGo to next file
:pGo to previous file
:e fileEdit file
!!programReplace line with output from program



VI Settings


Note: Options given are default. To change them, enter type :set option to turn them on or :set nooptioni to turn them off.To make them execute every time you open VI, create a file in your HOME directory called .exrc and type the options without the colon (:) preceding the option
:set aiTurns on auto indentation
:set allPrints all options to the screen
:set apPrints line after d c J m :s t u commands
:set bfDiscards control characters from input
:set dir=tmpSets tmp to directory or buffer file
:set ebPrecedes error messages with a bell
:set icIgnores case when searching
:set lispModifies brackets for Lisp compatibility.
:set listShows tabs (^l) and end of line ($)
:set magicAllows pattern matching with special characters
:set mesg Allows others to send messages
:set nooptionTurns off option
:set nuShows line numbers
:set optSpeeds output; eliminates automatic RETURN
:set promptPrompts for command input with :
:set reSimulates smart terminal on dumb terminal
:set reportIndicates largest size of changes reported on status line
:set roChanges file type to "read only"
:set scroll=nset n lines for CTRL-d and z
:set sh=shell_pathset shell escape (default is /bin/sh) to shell_path
:set showmodeIndicates input or replace mode at bottom
:set sw=nSets shift width to n characters
:set termPrints terminal type
:set terseShorten messages with terse
:set timeoutEliminates one-second time limit for macros
:set tl=nSets significance of tags beyond n characters (0 means all)
:set ts=nSets tab stops to n for text input
:set waInhibits normal checks before write commands
:set warnWarns "no write since last change"
:set window=nSets number of lines in a text window to n
:set wm=nSets automatic wraparound n spaces from right margin.



Key Mapping


NOTE: Map allows you to define strings of VI commands. If you create a file called ".exrc" in your home directory, any map or set command you place inside this file will be executed every time you run VI. To imbed control characters like ESC in the macro, you need to precede them with CTRL-v. If you need to include quotes ("), precede them with a \ (backslash). Unused keys in vi are: K V g q v * = and the function keys.
Example (The actual VI commands are in blue): :map v /I CTRL-v ESC dwiYou CTRL-v ESC ESC
Description: When v is pressed, search for "I" (/I ESC), delete word (dw), and insert "You" (iYou ESC). CTRL-v allows ESC to be inserted
:map key cmd_seqDefines key to run cmd_seq when pressed
:mapDisplays all created macros on status line
:unmap keyRemoves macro definition for key
:ab str stringWhen str is input, replaces it with string
:abDisplays all abbreviations
:una strUnabbreviates str



Other


~Toggle upp and lower case
JJoin lines
nJJoins the next n lines together; omitting n joins the beginning of the next line to the end of the current line
.Repeat last text-changing command
uUndo last change (Note: u in combination with . can allow multiple levels of undo in some versions)
UUndo all changes to line
;Repeats last f F t or T search command



Return to the top

Page produced by Lagmonster - Oct 2000

Saturday, January 27, 2007

Linux 101 - The very basics of Linux

Linux is an operating system that is available for free. It is what is known as open source, its source code is freely available for anyone to modify and as a result the operating system is very flexible; it runs on a variety of different platforms. It is commonly used in machines such as mobile phones and ATM’s and it’s now becoming quite popular. More…

Friday, January 26, 2007

Manage multiple Firefox profiles

If you share a computer with family members or roommates, or if you simply browse for different reasons - like work, blogging, school research, or play - you may want to use different Firefox settings each time you sit down to surf. Luckily, the Firefox profile manager can manage multiple browsing personalities for a single user on the same desktop More >>>

Wednesday, January 17, 2007

The Web Developers List of Resources.

This page is huge. Everything you can imagine form FF plugins to Ruby. This page has it all. More…

Secure VNC with Hamachi

VNC is not a secure protocol - and it won't work if the remote machine is behind a firewall you don't control. However, pairing up VNC with Hamachi, a Virtual Private Network application, you can remote control any computer securely over your private network across any combination of operating systems. Full Story >>>

Wednesday, January 10, 2007

Cisco Sues Apple Over IPhone

We all expected it...
I don't know if they'd lose a battle in a court of law, but in the court of public opinion/perception, Apple pwned everyone a long time ago with the 'i' thing. It's like some other people here are saying: even if they change the name, people are still probably gonna call it 'iPhone'. More >>>

Friday, January 05, 2007

MythTV - HOW TO - Ubuntu + MythTV = Free Tivo and an EASY Setup

For the past 4 days I've tried setting up KnoppMyth, Freevo, and MythDora on my Asus Digimatrix. Nothing worked, either wouldnt install correctly, or I would get a black screen instead of the channel I was watching. I finally give the handy dandy Ubuntu a whirl, and it works FIRST try, right out of the box! More >>>

MIT's OpenCourseWare = Free Online Classes

I read this from Yahoo News and I thought this was something SD'ers would like.

"By the end of this year, the contents of all 1,800 courses taught at one of the world's most prestigious universities will be available online to anyone in the world, anywhere in the world. Learners won't have to register for the classes, and everyone is accepted.

The cost? It's all free of charge."

Link to Yahoo News story

Link to MIT site

OCgeeks Knowledgebase

OCgeeks News

Latest Tech News

Daily Techno-Babble